| TRACTOR RULES |
MODIFIED TRUCK RULES |
| STOCK RPM |
26" HITCH HEIGHT 4 WHEEL DRIVE 28" 2 WHEEL DRIVE |
| 20" DRAWBAR HEIGHT |
STREET LEGAL WITH LICENSE AND INSURANCE |
| ALL WEIGHTS SAFELY SECURED |
UNDER HOOD INSPECTION |
| NO CURVED STACKS |
DOT APPROVED TIRES WITH 35" TALL MAX AND NO
CUT TIRES |
| DRIVERS MUST REMAIN SEATED |
RESSE HITCH OR DRAW BAR ACCEPTABLE, HOOK POINT MUST BE ACCESSABLE. HOOK POINT ON DRAW BAR CAN NOT BE NO FURTHER FORWARD THAN CENTER OF REAR AXLE |
| DRIVERS MUST BE 13 YERS OF AGE OF OLDER |
540 CUBIC INCH LIMIT ON SIZE OF BLOCK WITH
AFTER MARKET CAST BLOCK OK. OEM STOCK 1 TON
OR LESS DRIVE TRAIN |
| WILL DISQUALIFY INTOXIDATED DRIVERS |
MAY RUN FRONT WEIGHTS WITH A HANGING POINT 60"
OR LESS FROM CENTER OF FRONT AXLE. OTHER WEIGHTS IN BED ONLY |
| TRACTOR PULL CAN PULL ONE TIME PER CLASS |
SAFETY CHAINS OR LOOPS AROUND DRIVE SHAFTS |
| MUST HAVE FACTORY APPEARING FENDERS |
PUMP FUEL ONLY-NO ALCOHOL, NITROUS, OR METHANE
BASED FULES ALLOWED |
ALL BLOWER TRACTORS MUST HAVE WILLIE
BARS AND BE 2" PAST REAR TIRE AND LESS
THAN 10" OFF THE GROUND |
ALUMINUM INTAKE AND HEADERS ALLOWED
OPEN HEADERS ALLOWED. NO SIDE EXIT EXHAUST
IN FRONT OR REAR WHEELS. NO EXHAUST SHOULD EXIT OUT OF THE HOOD. |
DRAWBAR MUST NOT BE SHORTER THAN 18"
FROM CENTER AXLE TO HITCH POINT |
NO ALUMINUM HEADS-CAST, IRON ONLY |
| 3-POINT & PTO: MAY RUN WITH OR WITHOUT |
NO SANTIONED PULLING TRUCKS |
ALL BLOWER TRACTORS OVER 8MPH MUST
HAVE CROSSBAR IN STACK. MUST USE 3/8"
GRADE 8 BOLTS |
SCATTER BLANKETS HIGHTLY RECOMMENDED |
JUDGES DECISION FINAL AND TAKE PRECEDENT
OVER PRINTED MATERIAL! |
ALL TRUCKS MUST HAVE DRIVESHAFT SHIELD
AROUND THE REAR U JOINT. MUST BE 4" FROM CENTER
OF U JOINT BOTH WAYS, MADE FROM 1/8" THICK STEEL.
CAN BE BOLTED TOGETHER BY 3/8" BOLTS. SHIELD
CAN BE MAXIMUM 4" LARGER THAN THE DIAMETER OF
THE DRIVESHAFT |
